Product List

It is a quick drying clear urethane alkyd varnish.

It is a low viscosity, two pack epoxy varnish with good penetration properties.

It is a non-yellowing, clear varnish based on acrylic resin dissolved in white spirit.

HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application.

HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application.

HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application.

It is consists of silicone acrylic emulsion, additives and water.

It is consists of pure acrylic emulsion, additives and water.

It is based on resins and high molecular polymers to enhance the adhesion for thermoplastic road marking coatings on concrete or asphalt road surface.

It is a relatively quick-drying, zinc phosphate primer, based on long oil alkyd and urethane alkyd.

It is a quick-drying, one-component, modified epoxy ester primer with zinc phosphate rust-inhibiting pigments.

It is a quick-drying, urethane-modified alkyd primer.

It is a two-component epoxy polyamide primer, pigmented with zincphosphate rust-inhibiting pigments.

It is a two-component polyamide adduct-cured epoxy paint.

It is a two component, polyamide adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F.

It is a two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.

A two-component, solvent-borne, self-curing,inorganic zinc silicate with outstanding resistance against weathering and abrasion.

It is a two-component, low-zinc, solvent-borne ethyl silicate shopprimer, designed for automatic spray application.

It is a chlorinated rubber coating with aluminium flake pigment,Physically drying.

is a two-component, zinc rich epoxy primer.

is a two-component, activated zinc epoxy primer in compliance with the requirements in ISO 12944 Part 5, 2007 and Level 2, type II in SSPC Paint 20, 2002.

It is a two-component, high build epoxy paint which combines a relatively high volume solids content with a short drying time.Contains zinc phosphate.

Medium to high temperatures: 17630 with CURING AGENT 97330 Low to medium temperatures.

Medium to high temperatures: 17630 with CURING AGENT 97330 Low to medium temperatures.

It is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils.

is a two-component, pure epoxy universal primer, which cures to a smooth, hard and tough coating with excellent resistance to seawater and abrasion.

It is consists of acrylic copolymer emulsion, pigment, fillers, silica sands and additives etc.

It is a water-borne, acrylic dispersion paint.

It is a high solid three component silicone based product.

is a three component silicone based tiecoat with anticorrosive properties.

It is a high solid one component silicone based tiecoat for repair and touch-up areas of existing fouling release systems.

It is a fast-drying environment friendly coating based on acrylic emulsion.

It is a fast-drying environment friendly coating based on acrylic emulsion.

It is thermoplastic hard resin based retroreflective coatings with excellent adhesion, fast drying and good abrasion resistance.

It is a new generation, two-component acrylic material with 100% volume solids.

It is a new generation, two-component acrylic material with 100% volume solids.

It is a new generation, two-component acrylic material with 100% volume solids.

It is specially designed fast-dry road marking paints based on tailor-made macromolecule polymer.

It is specially designed fast-dry road marking paints based on tailor-made macromolecule polymer.

It is a new generation, two-component, fast-drying, thick-film marking paint.

It is a new type two-component, high film thickness, road marking materials for masking the old marking.

It is a two-component, solvent-free, epoxy filler, which - when fully cured - is resistant to water, aliphatic hydrocarbons, and related products.

It is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion.

It is a solvent-free, two-component, high-build, polyamine adduct cured epoxy paint, which cures to a coating with good resistance to fresh water.

It is a two-component, ultra high solids and very low VOC epoxy coating. It has good self priming properties and is suited for application even under humid conditions and on marginally prepared surfaces.

It is consists of acrylic copolymer emulsion,pigments, fillers and additives etc.

It is a fairly quick-drying alkyd paint.

High temperatures: 45141 with CURING AGENT 97820 Low to medium temperatures: 45143 with CURING AGENT 97430 HEMPADUR 45141/45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

High temperatures: 45141 with CURING AGENT 97820 Low to medium temperatures: 45143 with CURING AGENT 97430 HEMPADUR 45141/45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

It is a two-component, high solids, polyamine cured epoxy paint with good self-priming properties.

It is a two-componet, high build epoxy paint.

It is an amine-adduct cured epoxy coating.

It is a two-component aluminium pigmented universal epoxy paint.

It is a two-component, polyamide cured epoxy paint, pigmented with micaceous iron oxide (MIO).

A self-priming, two-component, highbuild, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating.

It is a self-priming, two-component, high-build, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating.

A two-component polyamide adduct cured, high solids, high build epoxy paint.

It is a two-component polyamide adduct cured, high solids, high build epoxy paint.

It is based on chlorinated rubber. Physically drying.

It is a two-component, high build epoxy paint.

It is an anticorrosive two-component, modified polyamide adduct cured epoxy.

It is a two component, high solids, high build epoxy coating.

It is a two-component aluminium pigmented universal epoxy paint with synthetic mineral fibres.

It is a self-priming, two-component, high-build, pure epoxy paint, polyamide/amine cured.

It is a self-priming, two-component, high-build, pure epoxy paint, polyamide/amine cured.

It is consists of imported pigments, super weather resistance resin and additives etc.

It is consists of pure acrylic emulsion, natural stone powder and additives etc.

It is a water-borne, two-component, fast curing polyamine cured epoxy paint.

It is a high level and special green architectural material used in exterior wall and interior wall.

It was made by abroad advanced technology of W/W and consists of high performance water borne resin, low odor, and toxin free and low VOC level ingredients. Its formula is very special.

It is a glossy alkyd enamel which forms a weather resistant coating.

It is a two-component, high-solids, high-gloss, polysiloxane enamel with excellent gloss and colour retention.

It is a two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and color retention.

It is a two-component polyurethane topcoat with aliphatic isocyanate, with good gloss and color retention.

It is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

It is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

It is a two-component VOC compliant polyurethane topcoat,cured with aliphatic isocyanate, with good gloss and colour retention.

It is a two-component, isocyanate-free, acrylic finishing coat with good gloss and colour retention.

It is a finishing coat based on acrylic resin and non-chlorinated plasticizer for optimum gloss and colour retention.

It is a VOC compliant finishing coat based on acrylic resin and non-chlorinated plasticizer for optimum gloss and colour retention.

It is a non-hiding, but strongly day-light reflecting acrylic paint with fluorescent pigments which give intense colour impression and high visibility (HI-VEE).

It is a heat resistant aluminium pigmented polysiloxane paint.

It is a heat resistant acrylic modified silicone paint.

It is consist of pure acrylic emulsion, pigment, extender and additives, etc.

It is consists of high elastomeric pure acrylic emulsion, pigment, extender and additives, etc.

It is consists of acrylic copolymer emulsion, pigments, fillers and additives etc.

It is a water-borne,two-component polyurethane enamel with excellent gloss and colour retention.

It is consists of silicone acrylic emulsion, pigments and additives etc.

is a high solids selfpolishing antifouling based on acrylic binders. The robust rosin technology combined with a good biocide package ensure predictable antifouling protection.

Hempel's Antifouling Globic 7000 is a high solids chemically hydrolysing SPC antifouling based on Nano Acrylate Technology (NAT).

It is a high solid, self-smoothening and self-polishing antifouling based on a hydrolysing silyl acrylate binder that ensures effective polishing control.

It is a high solid, self-smoothening and self-polishing antifouling based on a hydrolysing silyl acrylate binder that ensures effective polishing control.

It is a high solid, self-smoothening and self-polishing antifouling based on a hydrolysing silyl acrylate binder that ensures effective polishing control.

It is a two-component, amine adduct cured phenolic epoxy (novolac) coating with very good adhesion and high temperature, water and chemical resistance.

is an advanced fouling defence coating based on ActiGuard® technology which utilizes the added effect of advanced hydrogel silicone and an efficient fouling preventing biocide to boost the antifouling barrier, prolong the fouling free period and minimize hull roughness. Hempaguard X8, as part of the Hempaguard MaX system, possesses a very high fuel saving potential and is also suitable for vessels operating with long service intervals (up to 90 months) and/or very long idle periods (up to 120 days). Hempaguard X8 is an advanced fouling defence coating, based on silicone, with high solids content.

It is a petroleum resin based varnish.

Made by abroad advanced technology of W/W and consists of high performance water borne resin, low odor, and toxin free and low VOC level ingredients.

It is consists of acrylic copolymer emulsion, additives and water.

It is consists of acrylic copolymer emulsion, pigments, fillers and additives etc.

It is a solventless emulsion which can crosslink under room temperature without adding curing agents.

It is consists of acrylic copolymer emulsion, pigments, fillers and additives etc.

It is consists of silicate, redispersible powder emulsion, fillers and additives, etc.

It is consist of silicate, curing agent, fillers and additives.

It is a water borne two-component polyurethane finish.

It is consists of high elastomeric pure acrylic copolymer emulsion, pigments and additives etc.

It is consists of acrylic copolymer emulsion, pigments, fillers and additives etc.

It is consists of high elastomeric pure acrylic copolymer emulsion, pigments and additives etc.

It is consists of pure acrylic emulsion, high performance pearlescent pigments and additives.

It is consists of acrylic copolymer emulsion, pigments, fillers and additives etc.

It is consists of acrylic copolymer emulsion , pigments, fillers and additives etc.

It is consists of acrylic copolymer emulsion, pigments, fillers and anti-fungus additives etc.

It is consists of acrylic copolymer emulsion, pigments, fillers and advanced anti-fungus additives etc.

It is consists of acrylic copolymer emulsion, pigments, fillers and advanced anti-fungus additives etc.

It is consists of acrylic copolymer emulsion, pigments and additives etc.

It is consists of acrylic copolymer emulsion, pigments, fillers and additives etc.

It is consists of acrylic copolymer emulsion, pigments, fillers and additives etc.

It is consists of pure acrylic copolymer emulsion, pigments and additives etc.

It is consists of acrylic copolymer emulsion, pigments and additives etc.

It is consists of pure acrylic emulsion, pigments and additives etc.

It is consists of pure acrylic emulsion, pigments and additives etc.

It is consists of styrene copolymer emulsion, fillers, pigments and additives etc.

A paint consisting of acrylic copolymer emulsion, pigments and fillers , additives etc.

It is consists of acrylic copolymer emulsion, pigments, fillers and additives etc.